Show Crypto Ipsec Sa Ipv6 - Dell C9000 Series Reference Manual

show crypto ipsec sa ipv6

Display the IPsec security associations (SAs) used on OSPFv3 interfaces.
C9000 Series
Syntax
show crypto ipsec sa ipv6 [interface interface]
Parameters
interface interface
Defaults None.
Command Modes
EXEC
EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.2(1.0)
9.1.(0.0)
8.4.2.0
8.3.19.0
Usage Information The show crypto ipsec sa ipv6 command output displays security associations
set up for OSPFv3 links in IPsec authentication and encryption policies on the router.
(OPTIONAL) Displays information about the SAs used on a
specified OSPFv3 interface, where interface is one of the
following values:
• For a Port Channel interface, enter port-channel
number.
• For a 10-Gigabit Ethernet interface, enter
TenGigabitEthernet slot/port.
• For a 40–Gigabit Ethernet interface, enter fortyGigE
slot/port.
• For a VLAN interface, enter vlan vlan-id. The valid
VLAN IDs range is from 1 to 4094.
Description
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the S4810 and Z9000.
Introduced on the E-Series TeraScale.
Introduced on the S4820T.
Open Shortest Path First (OSPFv2 and OSPFv3) 1600