Fip-Snooping Max-Sessions-Per-Enodemac - Dell C9000 Series Reference Manual

Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
8.3.19.0
8.3.12.0
fip-snooping max-sessions-per-
enodemac
Configure the maximum session limit per ENode MAC address.
C9000 Series
Syntax
fip-snooping max—sessions—per—enode—mac max-sessions-value
To return the configured maximum sessions to the default value, use the no fip-
snooping max—sessions—per—enode—mac command.
Parameters
max-sessions-
value
Defaults 32
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.2(0.2)
Description
Introduced on the C9010.
Introduced on the S4820T.
Introduced on the S4810.
Enter the maximum number of sessions allowed per ENode
MAC address. The range is from 1 to 64.
Description
Introduced on the C9010.
Introduced on the S4810 and S4820T.
FCoE Transit 858