Transform-Set - Dell C9000 Series Reference Manual

transform-set

Specify the transform set for crypto policy use.
C9000 Series
Syntax
transform-set transform-set-name
To delete a transform set from the crypto policy, use the no transform-set
transform-set-name command.
Parameters
transform-set-
name
Defaults none
Command Modes CONFIG-CRYPTO-POLICY
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.2(1.0)
9.2(0.0)
Enter the name for the crypto policy transform set.
Descrption
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the Z9000, S4810, and S4820T.
Internet Protocol Security (IPSec) 1164