Show Isis Protocol - Dell C9000 Series Reference Manual

show isis protocol

Display IS-IS routing information.
C9000 Series
Syntax
show isis protocol [vrf vrf-name]
Parameters
vrf vrf-name
Command Modes
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.8(0.0)
9.7(0.0)
9.5(0.1)
9.2(0.2)
9.0.2.0
8.3.19.0
8.3.12.0
Example
The bold section identifies that Multi-Topology IS-IS is enabled.
Dell#show isis protocol
IS-IS Router: <Null Tag>
(OPTIONAL) Enter the keyword vrf followed by the name of the
VRF to display IS-IS routing information corresponding to that
VRF.
• EXEC
• EXEC Privilege
Description
Introduced on the C9010.
Introduced on the S3048-ON and S4048-ON.
Added support for VRF. Introduced on the S6000-ON.
Introduced on the Z9500.
Introduced on the Z9000.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the S4810.
System Id: F100.E120.0013 IS-Type: level-1-2
Manual area address(es):
49.0000.0001
Routing for area address(es):
49.0000.0001
Interfaces supported by IS-IS:
GigabitEthernet 1/1 - IP - IPv6
Intermediate System to Intermediate System (IS-IS) 1118