Power Inline Legacy - Dell C9000 Series Reference Manual

Interface
PoE Port
Priority
-------------
--------
PeGi 0/0/0
critical

power inline legacy

Allocate inline power to the legacy devices on a Port Extender .
C9000 Series
Syntax
power inline legacy {pe pe-id stack-unit unit number}
To disable the detection of legacy powered devices in a port extender, use the no
power inline legacy {pe pe-id stack-unit unit number} command.
Parameters
pe pe-id
stack-unit unit
number
Defaults Enabled
Command Modes
CONFIGURATION
CONFIGURATION TERMINAL BATCH
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.10(0.0)
9.9(0.0)
Usage Information The power inline legacy command allows the system to detect and allocate inline
power to the legacy devices on a Port Extender.
Use this command in Configuration Terminal Batch mode to allocate inline power to
the legacy devices in a dual-homing setup.
Inline Power
LLDP
Max / Alloc
Support
(Watts)
------------
------
30.00/0.00
0
Enter the keyword pe and the port extender ID. Range is 0–255.
Enter the keyword stack-unit and the unit number. Range is
0–7.
Description
Introduced the Configuration Terminal Batch mode on C9010.
Introduced on the C9010.
Inline Power Class
Consumed
(Watts)
------------ -------
0.00 NO_PD
Port Extenders (PE)
Device
Type
------
-
1754