Distance Ospf - Dell C9000 Series Reference Manual

distance ospf

Configure an OSPF distance metric for different types of routes.
C9000 Series
Syntax
distance ospf [external dist3] [inter-area dist2] [intra-area
dist1]
To delete these settings, use the no distance ospf command.
Parameters
external dist3
inter-area dist2
intra-area dist1
Defaults
Command Modes ROUTER OSPF
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
7.8.1.0
7.6.1.0
(OPTIONAL) Enter the keyword external then a number to
specify a distance for external type 5 and 7 routes. The range is
from 1 to 255. The default is 110.
(OPTIONAL) Enter the keywords inter-area then a number to
specify a distance metric for routes between areas. The range is
from 1 to 255. The default is 110.
(OPTIONAL) Enter the keywords intra-area then a number to
specify a distance metric for all routes within an area. The range
is from 1 to 255. The default is 110.
• external dist3 = 110
• inter-area dist2 = 110
• intra-area dist1 = 110
Description
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Added support for the Multi-Process OSPF.
Introduced on the S-Series.
Open Shortest Path First (OSPFv2 and OSPFv3) 1496