Vlan Forward-Delay - Dell C9000 Series Reference Manual

The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
7.6.1.0
7.5.1.0
6.2.1.1
Related

vlan forward-delay

Commands
Forwarding state.
vlan hello-time
vlan max-age
show spanning-tree pvst
vlan forward-delay
Set the amount of time the interface waits in the Listening state and the Learning state before transitioning to
the Forwarding state.
C9000 Series
Syntax
vlan vlan-range forward-delay seconds
To return to the default setting, use the no vlan forward-delay command.
Parameters
vlan vlan-range
forward-delay
seconds
Description
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced.
— changes the time interval before the system transitions to the
— change the time interval between BPDUs.
— changes the time interval before PVST+ refreshes.
— displays the PVST+ configuration.
Enter the keyword vlan then the VLAN numbers. The range is
from 1 to 4094.
Enter the keywords forward-delay then the time interval, in
seconds, that the system waits before transitioning PVST+ to the
forwarding state. The range is from 4 to 30 seconds. The default
is 15 seconds.
Per-VLAN Spanning Tree Plus (PVST+) 1652