Dell C9000 Series Reference Manual page 1549

Version
9.9(0.0)
9.4(0.0)
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
7.8.1.0
7.6.1.0
7.5.1.0
6.1.1.1
Usage Information The following describes the show ip ospf process-id database summary
command shown in the following example.
Item
LS Age
Options
LS Type
Link State ID
Advertising Router
LS Seq Number
Checksum
Length
Network Mask
TOS
Metric
Description
Introduced on the C9010.
Added support for VRF on all platforms (Except MXL and
STOMP).
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Added support for Multi-Process OSPF.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
Description
Displays the LSA age.
Displays the optional capabilities available on router. The
following options can be found in this item:
• TOS-capability or No TOS-capability is displayed
depending on whether the router can support Type of
Service.
• DC or No DC is displayed depending on whether the
originating router can support OSPF over demand circuits.
• E or No E is displayed on whether the originating router
can accept AS External LSAs.
Displays the LSA type.
Displays the Link State ID.
Identifies the router ID of the LSA's originating router.
Displays the link state sequence number. This number allows
you to identify old or duplicate LSAs.
Displays the Fletcher checksum of an LSA's complete contents.
Displays the length in bytes of the LSA.
Displays the network mask implemented on the area.
Displays the TOS options. Option 0 is the only option.
Displays the LSA metrics.
Open Shortest Path First (OSPFv2 and OSPFv3) 1549