Track Ip Route Metric Threshold - Dell C9000 Series Reference Manual

Version
9.9(0.0)
9.8(0.0)
9.7(0.0)
8.3.12.0
8.4.1.0
Usage Information Use this command to create an object that tracks the line-protocol state of a Layer 2
interface by monitoring its operational status (UP or DOWN).
When the link-level status goes down, the tracked object status is considered to be
DOWN; if the link-level status is up, the tracked object status is considered to be UP.
Related
Commands

track ip route metric threshold

Configure object tracking on the threshold of an IPv4 route metric.
C9000 Series
Syntax
track object-id ip route ip-address/prefix-len metric threshold
To return to the default setting, use the no track object-id command.
Parameters
object-id
ip-address/
prefix-len
Defaults none
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Description
Introduced on the C9010.
Introduced on the S3048-ON and S4048-ON.
Introduced on the S6000-ON.
Introduced on the S4810.
Introduced.
• show track – displays information about tracked objects, including configuration,
current state, and clients which track the object.
• track interface ip routing
IPv4 Layer 3 interface.
Enter the ID number of the tracked object. The range is 1 to 500.
Enter an IPv4 address in dotted decimal format. The valid IPv4
prefix lengths are from /0 to /32.
– configures object tracking on the routing status of an
Object Tracking 1468