On-Disable - Dell C9000 Series Reference Manual

Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
Usage Information Advertise extended power via MDI TLVs to all ports that are connected to the 802.1ab
powered endpoint devices.
When the advertise med power-via-mdi command is enabled in
CONFIGURATION mode, advertisement is enabled for all the interfaces in a system. To
enable advertisement for a specific interface, configure the command in INTERFACE
configuration mode.
Port extender (PE) processes and advertises LLDP power-via-MDI TLVs when the LLDP
advertisement of the TLV is enabled on the PE in class power management mode.
Incoming LLDP messages are processed only when the PE is in class power
management mode.

on-disable

Enable transmission of LLDP shutdown frames.
C9000 Series
Syntax
on-disable transmit {shutdown}
Parameters
transmit
shutdown
Defaults None.
Command Modes CONFIGURATION INTERFACE (conf-if-interface-lldp)
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
Description
Introduced on the C9010.
Enter the keyword transmit to transmits the LLDP frames.
Enter the keyword shutdown to shut down the LLDP frames.
Description
Introduced on the C9010.
Port Extenders (PE) 1750