Power-Cycle - Dell C9000 Series Reference Manual

power-cycle

Power-cycle the port extender (PE) stack-unit from the PE console
C9000 Series
Syntax
power-cycle stack-unit {unit-number | all }
Parameters
unit-number
all
Command Modes EXEC
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
Usage Information
Example
Dell#power-cycle ?
stack-unit
Dell#power-cycle stack-unit ?
<0-7>
all
Dell#power-cycle stack-unit 0
Dell#power-cycle stack-unit all ?
Enter a stack-unit number. Range is from 0 to 7.
Enter all to power-cycle all the stack-units.
Description
Introduced on the C9010 and C1048P.
CAUTION: Do not attempt to reset or power cycle when the system is going
through the process of upgrading.
Stack-unit
Unit number
Entire stack
PE Console Commands 1617