Show Ip Pim Summary - Dell C9000 Series Reference Manual

show ip pim summary

View information about PIM-SM operation.
C9000 Series
Syntax
show ip pim summary [vrf vrf-name]
Parameters
vrf vrf-name
Command Modes
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.8(0.0)
9.7(0.0)
9.5(0.0)
8.3.19.0
8.3.12.0
8.3.11.1
8.4.1.1
8.1.1.0
7.8.1.0
Example
Dell# show ip pim summary
PIM TIB version 495
Uptime 22:44:52
Entries in PIM-TIB/MFC : 2/2
(OPTIONAL) Enter the keyword vrf followed by the name of the
VRF to configure this setting on that VRF.
• EXEC
• EXEC Privilege
Description
Introduced on the C9010.
Introduced on the S3048-ON and S4048-ON.
Introduced on the S6000-ON. Added support for VRF.
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the S4810.
Introduced on the Z9000.
Support for the display of PIM-SM snooping status was added on
E-Series ExaScale.
Introduced on the E-Series ExaScale.
Introduced on the S-Series.
NOTE: Applies to specific VRF if input is provided, else
applies to Default VRF.
PIM-Sparse Mode (PIM-SM) 1695