mtu
Enable the verification of the configured maximum transmission unit (MTU) value in the received RA packets.
C9000 Series
Syntax
mtu value
To reset the MTU value, use the no mtu value command.
Parameters
value
Defaults
0
Command Modes
CONFIGURATION
CONFIGURATION TERMINAL BATCH
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.10(0.0)
9.9(0.0)
9.7(0.0)
9.7(0.0)
Enter the maximum transmission unit value in bytes. The range
is from 1,280 to 11,982 bytes.
Description
Introduced the Configuration Terminal Batch mode on C9010.
Introduced on the C9010.
Introduced on the S6000-ON.
Introduced on the S4810, S4820T, S5000, S6000, and Z9000
switches.
Neighbor Discovery Protocol (NDP)
1448