Layer 2; Mac Addressing Commands; Clear Mac-Address-Table - Dell C9000 Series Reference Manual

This chapter describes commands to configure Layer 2 features.
This chapter contains the following sections:
•

MAC Addressing Commands

• Virtual LAN (VLAN) Commands
• Far-End Failure Detection (FEFD)
Topics:
• MAC Addressing Commands
• Virtual LAN (VLAN) Commands
• Far-End Failure Detection (FEFD)
MAC Addressing Commands
The following commands are related to configuring, managing, and viewing MAC addresses.

clear mac-address-table

Clear the MAC address table of all MAC address learned dynamically.
C9000 Series
Syntax
clear mac-address-table {dynamic | sticky }{address mac-address |
all | interface interface | vlan vlan-id}
Parameters
dynamic
sticky
address mac-
address
all
Enter the keyword dynamic to specify dynamically-learned
MAC addresses.
Enter the keyword sticky to specify sticky MAC addresses.
Enter the keyword address then a MAC address in
nn:nn:nn:nn:nn:nn format.
Enter the keyword all to delete all MAC address entries in the
MAC address table.
29

Layer 2

Layer 2 1308