Ipv6 Nd Dad Attempts - Dell C9000 Series Reference Manual

ipv6 nd dad attempts

Configure the number of neighbor solicitation messages that are sent to perform duplicate address detection
(DAD) on the interface.
C9000 Series
Syntax
ipv6 nd dad attempts {number of attempts}
To restore the default value, use the no ipv6 nd dad attempts command.
Parameters
number of
attempts
Default 3 attempts
Command Modes
INTERFACE
INTERFACE (BATCH MODE)
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.10(0.0)
9.9(0.0)
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
Enter the number of attempts to be made to detect a duplicate
address. The range is from 0 to 15. Setting the value to 0
disables DAD on the interface.
Description
Introduced the Configuration Terminal Batch mode on C9010.
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
IPv6 Basics 1277