Protocol Gvrp - Dell C9000 Series Reference Manual

The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
7.6.1.0
Usage Information Fixed registration prevents an interface, configured using the command line, to belong
to a VLAN (static configuration) from being unconfigured when it receives a Leave
message. Therefore, Registration mode on that interface is fixed.
Normal registration is the default registration. The port's membership in the VLAN
depends on GVRP. The interface becomes a member of a VLAN after learning about
the VLAN through GVRP. If the VLAN is removed from the port that sends GVRP
advertisements to this device, the port stops being a member of the VLAN.
To advertise or learn about VLANs through GVRP, use the forbidden command when
you do not want the interface.
Related show gvrp
Commands

protocol gvrp

Access GVRP protocol — (config-gvrp)#.
C9000 Series
Syntax
protocol gvrp
Defaults Disabled.
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Description
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on C-Series, E-Series, and S-Series
— displays the GVRP configuration including the registration.
GARP VLAN Registration (GVRP) 902