Show Ip Ospf Database Summary - Dell C9000 Series Reference Manual

Link connected to: a Stub Network
--More--
Related show ip ospf database
Commands

show ip ospf database summary

Display the network summary (type 3) LSA routing information.
C9000 Series
Syntax
show ip ospf [process-id|vrf vrf-name]database summary [link-
state-id] [adv-router ip-address]
Parameters
process-id
vrf vrf-name
link-state-id
adv-router ip-
address
Command Modes
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Number of TOS metric: 0
TOS 0 Metric: 1
(Link ID) Network/subnet number: 11.1.5.0
— displays OSPF database information.
Enter the OSPF Process ID to show a specific process. If no
Process ID is entered, command applies only to the first OSPF
process.
Enter the keyword vrf and the name of the VRF to view LSA
routing information corresponding to the OSPF process that is
tied to a specific VRF.
(OPTIONAL) Specify LSA ID in dotted decimal format. The LSA ID
value depends on the LSA type, and it can be one of the
following:
•
•
•
(OPTIONAL) Enter the keywords adv-router then the IP
address of an Advertising Router to display only the LSA
information about that router.
• EXEC
• EXEC Privilege
the network's IP address for Type 3 LSAs or Type 5 LSAs
the router's OSPF router ID for Type 1 LSAs or Type 4 LSAs
the default destination (0.0.0.0) for Type 5 LSAs
Open Shortest Path First (OSPFv2 and OSPFv3) 1548