Monitor Interface - Dell C9000 Series Reference Manual

monitor interface

Monitor counters on a single interface or all interfaces on a line card. The screen is refreshed every five
seconds and the CLI prompt disappears.
C9000 Series
Syntax
monitor interface [interface] [linecard slot-id]
To disable monitoring and return to the CLI prompt, press the q key.
Parameters
interface
linecard slot-id
Command Modes
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.2(1.0)
(OPTIONAL) Enter the following keywords and slot/port or
number information:
•
•
•
•
•
•
Enter the linecard slot-id parameters to specify the switch
ports on a line card. The linecard slot ID range is from 0 to 11.
• EXEC
• EXEC Privilege
Description
Introduced on the C9010.
Introduced on the Z9500.
For the management port, enter the keyword
managementethernet then the slot (0 or 1) and the port
(0).
For a Tunnel interface, enter the keyword tunnel then the
slot/port. The range is from 1 to 16383.
For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE then the slot/port information.
For a VLAN interface, enter the keyword vlan then the
slot/port. The range is from 1 to 4094.
For a port extender Gigabit Ethernet interface, enter the
keyword peGigE then the pe-id / stack-unit / port-id
information. The pe-id range is from 0 to 255; the stack-
unit unit-number range is from 0 to 7; and the port-id
range is from 1 to 48.
Interfaces 946