Dell C9000 Series Reference Manual page 1558

Row Heading
LSR-Q
Other-Q
The following describes the error definitions for the show ip ospf statistics
process-id global command.
Error Type
Intf_Down
Non-Dr
Self-Org
Wrong_Len
Invld-Nbr
Nbr-State
Auth-Error
MD5-Error
Cksum-Err
Version
AreaMismatch
Conf-Issue
No-Buffer
Seq-no
Socket
Q-overflow
Unknown-Pkt
RtidZero
Example
ell#show ip ospf 1 statistics
Interface TenGigabitEthernet 0/0
Org
Description
The queue, for transmission or reception, for the link state
request packets.
The queue, for transmission or reception, for the link state
acknowledgement, database description, and update packets.
Description
Received packets on an interface that is either down or OSPF is
not enabled.
Received packets with a destination address of ALL_DRS even
though SELF is not a designated router.
Receive the self originated packet.
The received packet length is different to what was indicated in
the OSPF header.
LSA, LSR, LSU, and DDB are received from a peer which is not a
neighbor peer.
LSA, LSR, and LSU are received from a neighbor with stats less
than the loading state.
Simple authentication error.
MD5 error
Checksum Error
Version mismatch
Area mismatch
The received hello packet has a different hello or dead interval
than the configuration.
Buffer allocation failure.
A sequence no errors occurred during the database exchange
process.
Socket Read/Write operation error.
Packets dropped due to queue overflow.
Received packet is not an OSPF packet.
Received router-ID (0.0.0.0) from peer.
Error packets (Receive statistics)
Intf-Down
0
Wrong-Len
0 Non-Dr
0 Invld-Nbr
Open Shortest Path First (OSPFv2 and OSPFv3)
0 Self-
0 Nbr-
1558