Show Ip Pim Rp - Dell C9000 Series Reference Manual

Field
Neighbor address
Interface
Uptime/expires
Ver
DR prio/Mode
Example
Dell#show ip pim neighbor↵
Neighbor Interface Uptime/Expires Ver DR↵
Address Prio/Mode↵
127.87.3.4 Te 1/16 09:44:58/00:01:24 v2 1 / S↵

show ip pim rp

View all multicast groups-to-RP mappings.
C9000 Series
Syntax
show ip pim rp [mapping | group-address]
Parameters
mapping
group-address
Command Modes
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
Description
Displays the IP address of the PIM neighbor.
List the interface type, with either slot/port information or ID
(VLAN or Port Channel), on which the PIM neighbor was found.
Displays the amount of time the neighbor has been up then the
amount of time until the neighbor is removed from the multicast
routing table (that is, until the neighbor hold time expires).
Displays the PIM version number.
•
Displays the Designated Router priority and the mode.
•
•
•
(OPTIONAL) Enter the keyword mapping to display the multicast
groups-to-RP mapping and information on how RP is learnt.
(OPTIONAL) Enter the multicast group address mask in dotted
decimal format to view RP for a specific group.
• EXEC
• EXEC Privilege
v2 = PIM version 2
1 = default Designated Router priority (use the ip pim
dr-priority command)
DR = Designated Router
S = Sparse mode
PIM-Sparse Mode (PIM-SM) 1692