Show System - Dell C9000 Series Reference Manual

show system

Display the status of a specific stack-unit from the port extender (PE) console.
Syntax
show system [brief | stack-unit unit-id | stack-ports [status |
topology]
Parameters
brief
stack-unit unit-id
stack-ports status
| topology
Command Modes
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.7(0.0)
9.4(0.0)
9.0.2.0
9.0.0.0
8.3.19.0
8.3.11.4
8.3.11.1
8.3.7.0
7.8.1.0
(OPTIONAL) Enter the keyword brief to view an abbreviated
list of system information.
(OPTIONAL) Enter the keywords stack-unit then the stack
unit number for information. The stack-unit number range is
from 0 to 7.
(OPTIONAL) Enter the keywords stack-ports for information
about the status or topology of the stack ports.
• EXEC
• EXEC Privilege
Description
Introduced on the C9010 and C1048P.
Introduced on the S6000-ON.
Added support for the disabled-ports parameter .
Introduced on the S6000.
Introduced on the Z9000.
Introduced on the S4820T.
The brief parameter no longer displays the current Reload
mode. To display Reload mode, use the show reload-type
command. Modified the show system stack-unit command
output to support Piece Part ID (PPID).
Introduced on the Z9000.
Introduced on the S4810.
The Boot Flash field displays the code level for boot code 2.8.1.1
and newer, while older boot codes display as "Present".
PE Console Commands 1619