Disable - Dell C9000 Series Reference Manual

Version
8.2.1.0
7.4.1.0

disable

Disable the resilient ring protocol.
C9000 Series
Syntax
disable
To enable the Resilient Ring Protocol, use the no disable command.
Defaults Disabled
Command Modes CONFIGURATION (conf-frrp)
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.2(1.0)
8.3.11.1
8.3.19.0
8.3.11.1
8.3.7.0
8.2.1.0
7.4.1.0
Description
Introduced on the C-Series.
Introduced.
Description
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the Z9000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the C-Series.
Introduced.
Force10 OS Resilient Ring Protocol (FRRP) 887