Clear Counters Ipv6 Access-Group - Dell C9000 Series Reference Manual

Version
9.10(0.0)
9.9(0.0)
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
8.4.2.0
8.2.1.0
7.8.1.0
Usage Information For the new settings to take effect, save the new CAM settings to the startup-config
(write-mem or copy run start), then reload the system.
You can use the cam-acl-egress command in Configuration Terminal Batch mode
to allocate space for egress ACLs in a dual-homing setup.
Example
Dell#
Dell#configure
Dell(conf)#cam-acl-egress ?
default
l2acl
Dell(conf)#cam-acl-egress l2acl ?
<1-3>
Dell(conf)#cam-acl-egress l2acl 1 ?
ipv4acl
Dell(conf)#cam-acl-egress l2acl 1 ipv4acl 1 ?
ipv6acl
Dell(conf)#cam-acl-egress l2acl 1 ipv4acl 1 ipv6acl ?
<0-2>
Dell(conf)#cam-acl-egress l2acl 1 ipv4acl 1 ipv6acl 2

clear counters ipv6 access-group

Erase all counters maintained for the IPv6 access lists.
C9000 Series
Syntax
clear counters ipv6 access-group [access-list-name]
Description
Introduced the Configuration Terminal Batch mode on C9010.
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the E-Series TeraScale.
Introduced on the S-Series.
Introduced on the C-Series.
Reset Egress CAM ACL entries to default setting
Set L2-ACL entries
Number of FP blocks for l2acl
Set IPV4-ACL entries
Set IPV6-ACL entries
Number of FP blocks for IPV6 (multiples of 2)
IPv6 Access Control Lists (IPv6 ACLs) 1243