Show Hosts - Dell C9000 Series Reference Manual

Related
arp retries
Commands
reply in response to an ARP request.

show hosts

View the host table and DNS configuration.
C9000 Series
Syntax
show hosts
Command Modes
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.2(1.0)
9.0.0.0
8.3.19.0
8.3.11.1
8.1.1.0
7.6.1.0
7.5.1.0
6.1.1.0
Usage Information The following describes the show hosts command in the following example.
Field
Default domain...
Name/address
lookup...
— sets the number of ARP retries in case the system does not receive an ARP
• EXEC
• EXEC Privilege
Description
Introduced on the C9010.
Introduced on the Z9500.
Added support for IPv6 addresses.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the E-Series ExaScale.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
Description
Displays the domain name (if configured).
States if DNS is enabled on the system.
• If DNS is enabled, the Name/Address lookup is domain
service.
IPv4 Routing 1213