Debug Arp - Dell C9000 Series Reference Manual

Networking command-line reference guide

Hide thumbs Also See for C9000 Series:

Table of Contents

debug arp

View information on ARP transactions.

C9000 Series

debug arp [interface] [count value]

To stop debugging ARP transactions, use the no debug arp command.

Command Modes

EXEC Privilege

Command History

This guide is platform-specific. For command information about other platforms, refer

to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

(OPTIONAL) Enter the following keywords and slot/port or

number information:

For the Management interface, enter the keyword

ManagementEthernet then the slot/port information. The

slot range is from 0 to 1 and the port range is 0.

For a Port Channel interface, enter the keywords port-

channel then a number. The range is from 1 to 4096.

For a 10-Gigabit Ethernet interface, enter the keyword

TenGigabitEthernet then the slot/port information.

For a 40-Gigabit Ethernet interface, enter the keyword

fortyGigE then the slot/port information.

For a port extender (PE) Gigabit Ethernet interface, enter

the keyword peGigE then the pe-id / stack-unit / port-

idinformation.

For a VLAN, enter the keyword vlan then a number from 1

(OPTIONAL) Enter the keyword count then the count value. The

range is from 1 to 65534.

Introduced on the C9010.

Introduced on the Z9500.

Introduced on the S4820T.

IPv4 Routing

Table of Contents