Lldp-Med Commands - Dell C9000 Series Reference Manual

Networking command-line reference guide

Hide thumbs Also See for C9000 Series:

Table of Contents

Command Modes

EXEC Privilege

Command History

This guide is platform-specific. For command information about other platforms, refer

to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Dell#show running-config lldp

protocol lldp

LLDP-MED Commands

The following are the LLDP-MED (Media Endpoint Discovery) commands.

The Dell Networking OS LLDP-MED commands are an extension of the set of LLDP TLV advertisement

commands. The C-Series and S-Series support all commands.

The E-Series generally supports the commands. However, LLDP-MED commands are more useful on the C-

Series and the S50V model of the S-Series, because they support Power over Ethernet (PoE) devices.

As defined by ANSI/TIA-1057, LLDP-MED provides organizationally specific TLVs (Type Length Value), so that

endpoint devices and network connectivity devices can advertise their characteristics and configuration

information. The Organizational Unique Identifier (OUI) for the Telecommunications Industry Association (TIA)

is 00-12-BB.

LLDP-MED Endpoint Device — any device that is on an IEEE 802 LAN network edge, can communicate

using IP, and uses the LLDP-MED framework.

Introduced on the C9010.

Introduced on the Z9500.

Introduced on the S8420T.

Introduced on the Z9000.

Introduced on the S4810.

Introduced on the S-Series.

Introduced on the C-Series.

Introduced on the E-Series.

advertise dot1-tlv port-protocol-vlan-id port-vlan-id

advertise dot3-tlv max-frame-size

advertise management-tlv system-capabilities system-description

multiplier 3

Link Layer Discovery Protocol (LLDP)

Table of Contents