Dell C9000 Series Reference Manual page 1172

ip ip-address
no-refresh
Command Modes EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.2(1.0)
8.3.19.0
8.3.11.1
8.5.1.0
8.3.7.0
8.2.1.0
8.1.1.0
7.9.1.0
7.6.1.0
7.5.1.0
6.2.1.1
• For a port extender (PE) Gigabit Ethernet interface, enter
the keyword peGigE then the pe-id / stack-unit / port-id
information.
(OPTIONAL) Enter the keyword ip then the IP address of the
ARP entry you wish to clear.
(OPTIONAL) Enter the keywords no-refresh to delete the ARP
entry from CAM. Or use this option with interface or ip ip-
address to specify which dynamic ARP entries you want to
delete.
NOTE: Transit traffic may not be forwarded during the
period when deleted ARP entries are resolved again and
reinstalled in CAM. Use this option with extreme caution.
Description
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Added support for 4-port 40G line cards on ExaScale.
Introduced on the S4810.
Added support for 4094 VLANs on the E-Series ExaScale (the
prior limit was 2094).
Introduced on the E-Series ExaScale.
Introduced VRF on the E-Series.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
IPv4 Routing 1172