Dell C9000 Series Reference Manual page 1520

Parameters
connected
rip
static
metric metric-
value
metric-type type-
value
route-map map-
name
tag tag-value
Defaults Not configured.
Command Modes ROUTER OSPF
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
7.8.1.0
7.6.1.0
7.5.1.0
6.1.1.1
Usage Information To redistribute the default route (0.0.0.0/0), configure the default-information
originate command.
Enter the keyword connected to specify that information from
active routes on interfaces is redistributed.
Enter the keyword rip to specify that RIP routing information is
redistributed.
Enter the keyword static to specify that information from
static routes is redistributed.
(OPTIONAL) Enter the keyword metric then a number. The
range is from 0 (zero) to 16777214.
(OPTIONAL) Enter the keywords metric-type then one of the
following:
• 1 = OSPF External type 1
• 2 = OSPF External type 2
(OPTIONAL) Enter the keywords route-map then the name of
the route map.
(OPTIONAL) Enter the keyword tag then a number. The range is
from 0 to 4294967295.
Description
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Added support for Multi-Process OSPF.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
Open Shortest Path First (OSPFv2 and OSPFv3) 1520