Show Qos Policy-Map - Dell C9000 Series Reference Manual

Example
Dell#show qos class-map
Class-map match-any CM
Related class-map
Commands

show qos policy-map

View the QoS policy map information.
C9000 Series
Syntax
show qos policy-map {summary [interface] | detail [interface]}
Parameters
summary
interface
detail interface
Defaults none
Command Modes
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
Match ip access-group ACL
- identifies the class map.
To view a policy map interface summary, enter the keyword
summary and optionally one of the following keywords and slot/
port or number information:
•
•
To view a policy map interface in detail, enter the keyword
detail and optionally one of the following keywords and slot/
port or number information:
•
•
• EXEC
• EXEC Privilege
Description
Introduced on the C9010.
For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE then the slot/port information.
For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE then the slot/port information.
Quality of Service (QoS) 1828