Connect Pe - Dell C9000 Series Reference Manual

Command Modes
EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
Example
Dell#clear pe 4 statistics

connect pe

Connect to a port extender (PE) through Telnet.
C9000 Series
Syntax
connect pe pe-id
Parameters
pe-id
Default
None
Command Modes
EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
Usage Information You can connect to an attached PE through Telnet using the connect pe command
and view information specific to the PE system. After you log in to a port extender,
enter ? or help to display a list of supported commands.
Description
Introduced on the C9010.
Enter the keyword pe and the port extender ID. Range is from 0
to 255.
Description
Introduced on the C9010.
Port Extenders (PE) 1715