Dell C9000 Series Reference Manual page 1099

metric-type
{external |
internal}
level-1
level-1-2
level-2
route-map map-
name
Defaults
•
•
Command Modes
•
•
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.0.2.0
8.3.19.0
8.3.11.1
8.3.12.0
7.5.1.0
6.3.1.0
Usage Information To redistribute a default route (0.0.0.0/0), configure the default-information
originate command.
Changing or disabling a keyword in this command does not affect the state of the other
command keywords.
(OPTIONAL) The external link type associated with the default
route advertised into a routing domain. Specify one of the
following:
•
external
•
internal
(OPTIONAL) Routes are independently redistributed into IS-IS as
Level 1 routes.
(OPTIONAL) Routes are independently redistributed into IS-IS as
Level-1-2 routes.
(OPTIONAL) Routes are independently redistributed into IS-IS as
Level 2 routes. This setting is the default.
(OPTIONAL) If you do not enter the route-map argument, all
routes are redistributed. If a map-name value is not specified, no
routes are imported.
metric metric-value = 0
metric-type= internal; level-2
ROUTER ISIS (for IPv4)
CONFIGURATION-ROUTER-ISIS-ADDRESS-FAMILY-IPV6 (for IPv6)
Description
Introduced on the C9010.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Added support for IPv6 ISIS.
Introduced.
Intermediate System to Intermediate System (IS-IS) 1099