Command Modes
CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.5(0.1)
8.3.19.0
8.3.11.1
8.3.7.0
7.7.1.0
ip msdp sa-limit
Configure the upper limit of source-active (SA) entries in SA-cache.
C9000 Series
Syntax
ip msdp sa-limit number
To return to the default, use the no ip msdp sa-limit number command.
Parameters
number
Defaults
50000
Command Modes
CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.5(0.1)
Description
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the E-Series.
Enter the maximum number of SA entries in SA-cache. The
range is from 0 to 40000.
Description
Introduced on the C9010.
Introduced on the Z9500.
Multicast Source Discovery Protocol (MSDP)
1414