Show Ip Traffic - Dell C9000 Series Reference Manual

Column
Heading
ospf 100
Total 1388
active...
Example
Dell>show ip route summary
Route Source
connected
static
ospf 100
Intra-area: 762 Inter-area: 1 External-1: 600 External-2: 5
Total
Total 1388 active route(s) using 222440 bytes
Total 2 non-active route(s) using 128 bytes
Dell>
Related
show ip route
Commands

show ip traffic

View IP traffic statistics related to switch CPUs, including ICMP, UDP, TCP and ARP counters.
C9000 Series
Syntax
show ip traffic {all | cp | rp}
Parameters
all
cp
rp
Default View IP traffic statistics from all processors.
Command Modes EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
Description
If routing protocols (OSPF, RIP) are configured and routes are
advertised, then information on those routes is displayed.
Displays the number of active and non-active routes and the
memory usage of those routes. If there are no routes configured
in the system, this line does not appear.
Active Routes
17
3
1368
1388
— displays information about the routes found in the switch.
(OPTIONAL) Enter the keyword all to view IP traffic statistics
from all processors.
(OPTIONAL) Enter the keyword cp to view only IP traffic
statistics from the Control Processor.
(OPTIONAL) Enter the keyword rp to view only IP traffic
statistics from the Route Processor.
Non-active Routes
0
0
2
2
IPv4 Routing 1232