Dell C9000 Series Reference Manual page 1490

database-timers
Command Modes EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.4(0.0)
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.8.0
8.3.7.0
7.8.1.0
7.6.1.0
7.5.1.0
6.1.1.1
Usage Information The following describes the debug ip ospf command shown in the Example below.
Field
8:14
OSPF
v:
t:
l:
rid:
(OPTIONAL) Enter the keywords database-timers to display
the LSA throttling timer information.
Description
Introduced on the C9010.
Added support for VRF on all platforms (Except MXL and
STOMP).
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Added the database-timer rate-limit option for the
S4810.
Introduced on the S4810.
Added support for the Multi-Process OSPF.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
Description
Displays the time stamp.
Displays the OSPF process ID: instance ID.
Displays the OSPF version. The system supports version 2 only.
Displays the type of packet sent:
• 1 - Hello packet
• 2 - database description
• 3 - link state request
• 4 - link state update
• 5 - link state acknowledgement
Displays the packet length.
Displays the OSPF router ID.
Open Shortest Path First (OSPFv2 and OSPFv3) 1490