Clear Ip Ospf Statistics - Dell C9000 Series Reference Manual

clear ip ospf statistics

Clear the packet statistics in interfaces and neighbors.
C9000 Series
Syntax
clear ip ospf process-id vrf vrf-name statistics [interface name
{neighbor router-id}]
Parameters
process-id
vrf vrf-name
interface name
neighbor router-
id
Defaults none
Command Modes EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Enter the OSPF Process ID to clear a specific process. If no
Process ID is entered, all OSPF processes are cleared.
Enter the keyword vrf and the name of the VRF to clear all
OSPF routing tables corresponding to that VRF
(OPTIONAL) Enter the keyword interface then one of the
following interface keywords and slot/port or number
information:
• For a 1-Gigabit Ethernet interface, enter the keyword
GigabitEthernet then the slot/port information.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE then the slot/port information.
• For a Loopback interface, enter the keyword loopback
then a number from 0 to 16383.
• For a Null interface, enter the keywords null 0.
• For Port Channel groups, enter the keywords port-
channel then a number. The range is from 1 to 128.
• For a tunnel interface, enter the keyword tunnel then the
tunnel ID. The range is from 1 to 16383.
• For a VLAN, enter the keyword vlan then a number from 1
to 4094.
(OPTIONAL) Enter the keyword neighbor then the neighbor's
router-id in dotted decimal format (A.B.C.D.).
Open Shortest Path First (OSPFv2 and OSPFv3) 1488