Clear Ipv6 Route - Dell C9000 Series Reference Manual

clear ipv6 route

Clear (refresh) all or a specific route from the IPv6 routing table.
C9000 Series
Syntax
clear ipv6 route {* | ipv6-address prefix-length }[vrf vrf-name]
Parameters
*
ipv6-address
prefix-length
vrf vrf-name
Command Modes EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.7(0.1)
9.7(0.1)
9.7(0.0)
9.0.0.0
8.3.19.0
8.3.7.0
8.2.1.0
7.8.1.0
7.4.1.0
Enter the * to clear (refresh) all routes from the IPv6 routing
table.
Enter the IPv6 address in the x:x:x:x::x format then the prefix
length in the /x format. The range is from /0 to /128.
NOTE: The :: notation specifies successive hexadecimal
fields of zeros.
(Optional) Enter the keyword vrf and the name of the VRF to
clear the IPv6 routes corresponding to that VRF.
Description
Introduced on the C9010.
Introduced on the S3048-ON.
Introduced on the S4048-ON.
Added support for VRF.
Introduced on the Z9000.
Introduced on the S4820T.
Introduced on the S4810.
Introduced on the E-Series ExaScale.
Introduced on the C-Series and S-Series.
Introduced on the E-Series TeraScale.
Open Shortest Path First (OSPFv2 and OSPFv3) 1572