Router Isis - Dell C9000 Series Reference Manual

router isis

Enable the IS-IS routing protocol and specify an IP IS-IS process.
C9000 Series
Syntax
router isis [tag][vrf vrf-name]
To disable IS-IS routing, use the no router isis [tag] command.
Parameters
vrf vrf-name
tag
Defaults Not configured.
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.8(0.0)
9.7(0.0)
9.5(0.1)
9.0.2.0
8.3.19.0
8.3.12.0
8.3.11.1
Usage Information Configure a network entity title (the net command) to specify the area address and the
router system ID.
Enter the keyword vrf followed by the name of the VRF to
enable the IS-IS routing protocol and to specify an IP IS-IS
process on that VRF.
(OPTIONAL) This is a unique name for a routing process. A null
tag is assumed if the tag option is not specified. The tag name
must be unique for all IP router processes for a given router.
Description
Introduced on the C9010.
Introduced on the S3048-ON and S4048-ON.
Added support for VRF. Introduced on the S6000-ON.
Introduced on the Z9500.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the S4810.
Introduced on the Z9000.
Intermediate System to Intermediate System (IS-IS) 1104