Dell C9000 Series Reference Manual page 1806

Parameters
ip
ipv6
ip-any
dscp-list
set-ip-dscp value
set-color value
Defaults none
Command Modes CLASS-MAP CONFIGURATION (config-class-map)
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.5(0.1)
9.5(0.0)
9.2(1.0)
9.0.2.0
8.3.19.0
8.3.11.1
8.3.7.0
7.7.1.0
7.6.1.0
7.5.1.0
6.2.1.1
Enter the keyword ip to support IPv4 traffic.
Enter the keyword ipv6 to support IPv6 traffic.
Enter the keyword ip-any to support IPv4 and IPv6 traffic.
Enter the IP DSCP values that is to be the match criteria.
Separate values by commas — no spaces ( 1,2,3 ) or indicate a
list of values separated by a hyphen (1-3). The range is from 0 to
63.
(OPTIONAL) Enter the keywords set-ip-dscp then the IP
DSCP value. The matched traffic is marked with the DSCP value.
The range is from 0 to 63.
(Optional) Enter the keyword set-color followed by a color
value. Traffic that fulfills the match criteria is marked with the
color value that you specify. The default value is yellow.
Description
Introduced on the C9010.
Added the ipv6 and ip-any options on the Z9500.
Added the ipv6 and ip-any options on the Z9000, S6000,
S4820T, S4810, MXL.
Introduced on the Z9500.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Added the keyword multicast. Added the DSCP Marking
option support on the S-Series.
Introduced on the S-Series.
Introduced on the C-Series. Added support for the DSCP
Marking option.
Introduced on the E-Series.
Quality of Service (QoS) 1806