Show Ipv6 Mld_Host - Dell C9000 Series Reference Manual

show ipv6 mld_host

Display the IPv6 MLD host counters.
C9000 Series
Syntax
show ipv6 mld_host
Command Modes EXEC
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Neworking OS version history for this command.
Version
9.9(0.0)
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
Usage Information The following describes the show ipv6 mld-host command shown in the following
example.
Field
Valid MLD Packets
Reports
Leaves
MLDv1 queries
MLDv2 queries
ff02::1:ffff:6f08
ff02::1
ff02::2
ff02::1:ff00:4
ff02::1:ffff:6f08
Description
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Description
The total number of packets received and sent from the last
time the elapsed time was cleared.
The total number of reports (queries and unsolicited reports
generated from joins or leaves) that have been received or sent.
The number of Multicast leaves that have been sent.
The number of MLDv1 queries that have been received.
The number of MLDv2 queries that have been received.
IPv6 Basics 1293