Distribute-List In - Dell C9000 Series Reference Manual

Version
9.0.2.0
8.3.19.0
8.3.12.0
8.3.11.1
6.3.1.0
Usage Information The administrative distance indicates the trust value of incoming packets. A low
administrative distance indicates a high trust rate. A high value indicates a lower trust
rate. For example, a weight of 255 is interpreted that the routing information source is
not trustworthy and should be ignored.

distribute-list in

Filter network prefixes received in updates.
C9000 Series
Syntax
distribute-list prefix-list-name in [interface]
To return to the default values, use the no distribute-list prefix-list-name
in [interface] command.
Parameters
prefix-list-name
interface
Defaults Not configured.
Command Modes
Description
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the S4810.
Introduced on the Z9000.
Introduced.
Specify the prefix list to filter prefixes in routing updates.
(OPTIONAL) Identifies the interface type slot/port as one of the
following:
•
•
•
•
•
• ROUTER ISIS (for IPv4)
For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE then the slot/port information.
For a Port Channel interface, enter the keywords port-
channel then a number. The range is from 1 to 128.
For a SONET interface, enter the keyword sonet then the
slot/port information.
For a VLAN, enter the keyword vlan then a number from 1
to 4094.
Intermediate System to Intermediate System (IS-IS) 1059