Ipv6 Router Ospf - Dell C9000 Series Reference Manual

ipv6 router ospf

Enable OSPF for IPv6 router configuration.
C9000 Series
Syntax
ipv6 router ospf process-id [vrf vrf-name]
To exit OSPF for IPv6, use the no ipv6 router ospf process-id command.
Parameters
process-id
vrf vrf-name
Defaults none
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.8(0.0)
9.7(0.0)
9.1.(0.0)
8.3.19.0
7.8.1.0
7.4.1.0
Enter the process identification number. The range is from 1 to
65535.
(Optional) Enter the keyword vrf and the name of the VRF to
install IPv6 routes in that VRF.
Description
Introduced on the C9010.
Introduced on the S3048-ON and S4048-ON.
Added support for VRF.
Introduced on the S4810 and Z9000.
Introduced on the S4820T.
Added support for the C-Series.
Introduced on the E-Series.
Open Shortest Path First (OSPFv2 and OSPFv3) 1592