Internet Group Management
IGMP and IGMP snooping commands are supported by the Dell Networking OS on the switch.
This chapter contains the following sections:
•
IGMP Commands
•
IGMP Snooping Commands
Topics:
•
IGMP Commands
•
IGMP Snooping Commands
IGMP Commands
The system supports IGMPv1/v2/v3 and is compliant with RFC-3376.
Important Points to Remember
•
The system supports protocol-independent multicast-sparse (PIM-SM) and protocol-independent
source-specific multicast (PIM-SSM) include and exclude modes.
•
IGMPv2 is the default version of IGMP on interfaces. You can configure IGMPv3 on interfaces. It is
backward compatible with IGMPv2.
•
The switch supports up to 95 interfaces.
•
There is no hard limit on the maximum number of groups supported.
•
IGMPv3 router interoperability with IGMPv2 and IGMPv1 routers on the same subnet is not supported.
•
An administrative command (ip igmp version) is added to manually set the IGMP version.
•
All commands previously used for IGMPv2 are compatible with IGMPv3.
Protocol (IGMP)
Internet Group Management Protocol (IGMP)
23
1124