Dell C9000 Series Reference Manual page 1225

Parameters
all
connected
summary
static
Command Modes EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.7(0.1)
9.7(0.1)
9.7(0.0)
9.2(1.0)
9.0.2.0
9.0.0.0
8.3.19.0
8.4.1.0
8.3.7.0
Example
Dell#show ipv6 management-route
IPv6 Destination
----------------
2001:34::0/64
2001:68::0/64
Dell#
(OPTIONAL) Enter the keyword all to view all IP addresses
assigned to all Management interfaces on the switch.
(OPTIONAL) Enter the keyword connected to view only routes
directly connected to the Management interface.
(OPTIONAL) Enter the keyword summary to view a table listing
the number of active and non-active routes and their sources.
(OPTIONAL) Enter the keyword static to view non-active
routes also.
Description
Introduced on the C9010.
Introduced on the S3048-ON.
Introduced on the S4048-ON.
Introduced on the S6000-ON.
Introduced on the Z9500.
Introduced on the S6000.
Introduced on the Z9000.
Introduced on the S4820T.
Introduced on the C- and E-Series.
Introduced on the S4810.
Gateway
-------
ManagementEthernet 0/0
2001:34::16
State
-----
Connected
Active
IPv4 Routing 1225