Dell C9000 Series Reference Manual page 1629

Version
9.9(0.0)
9.2(1.0)
8.3.19.0
8.3.7.0
8.3.11.1
8.3.1.0
7.8.1.0
7.7.1.0
Usage Information Resetting is a soft reboot, including flushing the forwarding tables. The hard option is available
for PE stack-unit from the PE console only.
To reset (soft reboot) a stack-unit from PE console, use the reset command and specify the
stack-unit number. To perform a hard reset or power-cycle to a specified stack-unit, use the
reset stack-unit unit-number hard command.
Example: linecard
Dell#reset linecard 0
Dell#Jun 24 15:26:39: %RPM1-P:CP %CHMGR-5-LINECARD_RESET: linecard 0
being reset
Jun 24 15:26:39: %RPM1-P:CP %CHMGR-2-LINECARD_DOWN: linecard 0 down -
reset
Jun 24 15:26:39: %RPM1-P:CP %IFMGR-1-DEL_PORT: Removed port: Fo 0/0-20,
Dell#Jun 24 15:28:24: %RPM1-P:CP %CHMGR-5-CHECKIN: Checkin from
linecard 0 (type C9000LC0640, 24 ports)
Jun 24 15:28:24: %RPM1-P:CP %CHMGR-5-LINECARD_UP: linecard 0 is up
Jun 24 15:28:28: %C9000LC0640:0 %IFAGT-5-INSERT_OPTICS_QSFP: Optics
QSFP inserted in slot 0 port 0
Jun 24 15:28:28: %C9000LC0640:0 %IFAGT-5-INSERT_OPTICS_QSFP: Optics
QSFP inserted in slot 0 port 4
Jun 24 15:28:28: %C9000LC0640:0 %IFAGT-5-INSERT_OPTICS_QSFP: Optics
QSFP inserted in slot 0 port
16
Example: pe stack-
Dell#reset stack-unit 2
unit
Dell#Jun 24 15:19:52: %PE255-UNIT1-M:CP %CHMGR-5-STACKUNIT_RESET: stack-
unit 2 being reset
Jun 24 15:19:52: %PE255-UNIT1-M:CP %CHMGR-2-STACKUNIT_DOWN: stack-unit
2 down - reset
Jun 24 15:19:53: %PE255-UNIT1-M:CP %IFMGR-5-OSTATE_DN: Changed
interface state to down: Te 2/48
Jun 24 15:19:53: %PE255-UNIT1-M:CP %IFMGR-1-DEL_PORT: Removed port: Te
2/48-49,
Jun 24 15:19:53: %PE255-UNIT2-S:CP %IFMGR-1-DEL_PORT: Removed port: Te
2/48-49,
Jun 24 15:19:58: %PE255-UNIT1-M:CP %POLLMGR-2-ALT_STACKUNIT_STATE:
Alternate Stack-unit is not present
Jun 24 15:19:58: %PE255-UNIT1-M:CP %CHMGR-2-STACKUNIT_DOWN: stack-unit
2 down - card removed
Jun 24 15:20:06: %PE255-UNIT1-M:CP %POLLMGR-2-ALT_STACKUNIT_STATE:
Description
Introduced on the C9010 and C1048P.
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the S4810.
Introduced on the Z9000.
Added the hard reset option.
Augmented to run on the standby unit in order to reset the standby unit
directly.
Introduced on the S-Series.
PE Stacking 1629