Show Ecid - Dell C9000 Series Reference Manual

The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
Example
Dell(conf-pe-5)# show config
!
pe provision 5
stack-unit 4 type C1048P
Dell(conf)#pe 255
Dell(conf-pe-255)#show config
!
pe provision 255
cascade interface TenGigabitEthernet 6/0
stack-unit 1 type C1048P

show ecid

Display the E-Channel identifier (ECID) information for all or any specified interfaces.
C9000 Series
Syntax
show ecid {interface [interface] | pe pe-id stack—unit unit-
number}
Parameters
interface interface
pe pe-id
stack-unit unit-
number
Description
Introduced on the C9010.
Enter the interface keyword, and specify one of the following
interface types:
• For a PE Gigabit Ethernet interface, enter the keyword
peGigE. You must specify a pe-id/stack-unit/port-id for
the interface.
• For a port channel interface, enter the keyword port-
channel
• For a VLAN interface, enter the keyword vlan then a
number from 1 to 4094.
.
Enter the keyword pe keyword and specify a port extender ID
number. Range is from 0 to 255.
Enter the keyword stack-unit and the unit number. Range is
from 0 to 7.
Port Extenders (PE) 1721