Match Ip Vlan; Match Mac Access-Group - Dell C9000 Series Reference Manual

match ip vlan

Uses a VLAN as the match criterion for an L3 class map.
C9000 Series
Syntax
match ip vlan vlan-id
To remove VLAN as the match criterion, use the no match ip vlan vlan-id
command.
Parameters
vlan vlan-id
Defaults none
Command Modes CONF-CLASS-MAP
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.5(0.1)
9.4.(0.0)
Usage Information To access this command, enter the class-map command. After the class map is
identified, you can configure the match criteria.
Use this command to match an IP class-map against a single VLAN ID .
Related class-map
Commands

match mac access-group

Configure a match criterion for a class map, based on the contents of the designated MAC ACL.
C9000 Series
Syntax
match mac access-group {mac-acl-name}
Enter the keyword vlan and then the ID of the VLAN. The range
is from 1 to 4094.
Description
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the S-Series and Z-Series.
— identifies the class map.
Quality of Service (QoS) 1809