Show Running-Config Ecmp-Group; Shutdown - Dell C9000 Series Reference Manual

show running-config ecmp-group

Display interfaces, LAG, or LAG link bundles being monitored for uneven traffic distribution using the ecmp-
group monitoring enable command. The ECMP group could have a LAG or a list of 10G/40 interfaces
(not just LAG link-bundles).
C9000 Series
Syntax
show running-config ecmp-group
Defaults Disabled.
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.10.0
Related ecmp-group
Commands

shutdown

Disable an interface.
C9000 Series
Syntax
shutdown
To activate an interface, use the no shutdown command.
Defaults The interface is disabled.
Command Modes INTERFACE
Description
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
— configures a mechanism to monitor traffic distribution.
Interfaces 1006