Description - Dell C9000 Series Reference Manual

Version
6.3.1.0
Usage Information When you use this command to redistribute routes into a routing domain, the router
becomes an autonomous system (AS) boundary router. An AS boundary router does
not always generate a default route into a routing domain. The router still requires its
own default route before it can generate one.
How a metric value assigned to a default route advertises depends on the metric-
style command configuration. If the metric-style command is set for Narrow
mode and the metric value in the default-information originate command is
set to a number higher than 63, the metric value advertised in the LSPs is 63. If the
metric-style command is set for Wide mode, the metric value in the default-
information originate command is advertised.
Related
Commands

description

Enter a description of the IS-IS routing protocol.
C9000 Series
Syntax
description {description}
To remove the description, use the no description {description} command.
Parameters
description
Defaults none
Command Modes ROUTER ISIS
Command History
Version
9.9(0.0)
9.5(0.1)
9.0.2.0
8.3.19.0
Description
Introduced.
• redistribute — redistributes routes from one routing domain to another routing
domain.
Enter a description to identify the IS-IS protocol (80 characters
maximum).
Description
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the S6000.
Introduced on the S4820T.
Intermediate System to Intermediate System (IS-IS) 1057