Show Config - Dell C9000 Series Reference Manual

Parameters
high
low
medium
Defaults none
Command Modes POLICY LIST CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.7(0.0)
9.7(0.0)

show config

Display the RA guard policy mode configurations.
C9000 Series
Syntax
show config
Command Modes POLICY LIST CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.7(0.0)
9.7(0.0)
Enter the keyword high to set the DRP value as high.
Enter the keyword low to set the DRP value as low.
Enter the keyword medium to set the DRP value as medium.
Description
Introduced on the C9010.
Introduced on the S6000-ON.
Introduced on the S4810, S4820T, S5000, S6000, and Z9000
switches.
Description
Introduced on the C9010.
Introduced on the S6000-ON.
Introduced on the S4810, S4820T, S5000, S6000, and Z9000
switches.
Neighbor Discovery Protocol (NDP) 1453