Dell C9000 Series Reference Manual page 998

Line Description
Tx Power Present Tx power of the SFP. If this crosses Tx power alarm/
warning thresholds, the Tx power high alarm/warning flag is set
to true. If it falls below the low alarm/warning thresholds, the Tx
power low alarm/ warning flag is set to true.
Rx Power Present receiving (Rx) power of the SFP. This value is either
average Rx power or OMA. This depends on the Rx Power
measurement type displayed above. If this crosses Rx power
alarm/warning thresholds, the Rx power high alarm/warning flag
is set to true. If it falls below the low alarm/warning thresholds,
the Rx power low alarm/warning flag is set to true.
Data Ready state This field indicates that the transceiver has achieved power up
Bar and data is ready. This is set to true if data is ready to be sent and
set to false if data is being transmitted.
Rx LOS state This is the digital state of the Rx_LOS output pin. This is set to
true if the operating status is down.
Tx Fault state This is the digital state of the Tx Fault output pin.
Rate Select state This is the digital state of the SFP rate_select input pin.
RS state This is the reserved digital state of the pin AS(1) per SFF-8079
and RS(1) per SFF-8431.
Tx Disable state If the admin status of the port is down, then this flag is set to
true.
Temperature High This can be either true or false, depending on the Current
Alarm Flag voltage value displayed above.
Voltage High This can be either true or false, depending on the Current
Alarm Flag Temperature value displayed above.
Tx Bias High This can be either true or false, depending on the present Tx bias
Alarm Flag current value displayed above.
Tx Power High This can be either true or false, depending on the Current Tx
Alarm Flag bias power value displayed above.
Rx Power High This can be either true or false, depending on the Current Rx
Alarm Flag power value displayed above.
Temperature Low This can be either true or false, depending on the Current
Alarm Flag Temperature value displayed above.
Voltage Low This can be either true or false, depending on the Current
Alarm Flag voltage value displayed above.
Tx Bias Low Alarm This can be either true or false, depending on the Tx bias current
Flag value displayed above.
Tx Power Low This can be either true or false, depending on the Current Tx
Alarm Flag power value displayed above.
Interfaces 998